Primary Airsoft HPA to M4 Magazine Adapter for Hi-Capa Gas Blowback Airsoft Pistols

What's Included?

• Primary Airsoft HPA to M4 Magazine Adapter for Hi-Capa Gas Blowback

Features:

• Lightweight glass-reinforced nylon polymer construction with CNC aluminum magazine release
• Designed to even the playing field when playing airsoft with a pistol as a primary against AEGs with hi-cap mags.
• Allows you to use HPA and M4 AEG magazines on your airsoft pistol
• Comes pre-equipped with a Foster quick disconnect
• Includes a longer screw with 2.5mm hex head and new universal feed tube

Technical Specifications:

• Model Number: Mag-PA-H-A-M-002
• Compatibility: Tokyo Marui, EMG, WE-Tech, AW Custom, and Other Compatible Hi-CAPA 5.1 Gas Blowback Airsoft Pistols. NOT compatible w/ Hi-CAPA 4.3 magazines
• Magazine Compatibility: Accepts most M4 Airsoft AEG magazines
• Materials: Glass-Reinforced Nylon, CNC Aluminum

Q&A

Q: What airsoft pistols are compatible with this adapter?
A: The adapter is compatible with most Hi-Capa 5.1 Gas Blowback Airsoft pistols, including those made by Tokyo Marui, EMG, WE-Tech, and AW Custom. It is not compatible with Hi-Capa 4.3 magazines.

Q: Can I use any M4 AEG magazine with this adapter?
A: Yes, the adapter accepts most M4 Airsoft AEG magazines. For the best performance, it is recommended to use high-quality magazines with strong springs to ensure consistent BB feeding.

Q: What materials are used to make this adapter?
A: The adapter is constructed from a lightweight glass-reinforced nylon polymer, with a CNC aluminum magazine release for durability and precision.

Q: What kind of HPA setup do I need to use this adapter?
A: To use this adapter, you will need an M4 AEG magazine, a paintball tank with a low-pressure regulator (0-140 psi), and a hose with a Foster quick disconnect. It is recommended to operate at approximately 120 psi to match the typical pressure of green gas and avoid exceeding 140 psi to prevent damage to your pistol’s internal components.

Q: What maintenance tips should I keep in mind when using this adapter?
A: To maintain performance, avoid leaving BBs in your magazines for extended periods, as this can weaken the magazine springs. If springs wear out, they should be replaced with superfeed springs for optimal performance.

Q: Can I change the quick disconnect fitting on this adapter?
A: Yes, the metal quick disconnect fitting that comes installed is a US-standard Foster Pneumatics 1/8 NPT quick disconnect. You can replace it with any fitting that has 1/8 NPT threads, but be cautious not to cross-thread the fitting during installation.

Q: Are there any limitations or important notes to consider?
A: This adapter does not include a pistol, magazine, or any additional accessories. Ensure that the pressure of your HPA setup does not exceed 140 psi to avoid causing excessive wear to your airsoft pistol.

About the Primary Airsoft HPA to M4 Magazine Adapter for Hi-Capa Gas Blowback Airsoft Pistols

The Primary Airsoft HPA to M4 Magazine Adapter for Hi-Capa Gas Blowback Airsoft Pistols is an innovative solution designed to enhance the performance of your airsoft pistol in competitive environments. This adapter allows users to attach M4 AEG magazines and utilize High Pressure Air (HPA) systems with compatible Hi-Capa 5.1 Gas Blowback pistols. Made from lightweight glass-reinforced nylon polymer with a CNC-machined aluminum magazine release, this adapter is built for durability and precision. Its design helps bridge the gap between airsoft pistol users and those using AEGs with high-capacity magazines, offering a more level playing field.

Equipped with a Foster quick disconnect, the adapter is easy to integrate into most HPA setups. Players will need an M4 AEG magazine, a paintball tank with a low-pressure regulator (0-140 psi), and a hose with a Foster (PolarStar) quick disconnect to use the system. The adapter ensures optimal performance when operated at pressures around 120 psi, similar to green gas, and should not exceed 140 psi to prevent internal damage to the pistol. This gives players the flexibility of using HPA without compromising the internal longevity of their pistols.

For consistent and reliable BB feeding, it’s recommended to use high-quality M4 AEG magazines with strong springs. Worn-out springs should be replaced with superfeed springs to maintain optimal performance. Additionally, the quick disconnect fitting is a US-standard Foster Pneumatics 1/8 NPT fitting, which can be replaced with other fittings of the same thread size if needed. This adapter is an ideal choice for players looking to use their airsoft pistol as a primary weapon without sacrificing ammo capacity or reload speed, especially in fast-paced airsoft games where every shot counts.