Maxx Model CNC Hopup Chamber M4E (for Standard M4)

What's Included?

• Maxx Hopup Chamber M4E (for Standard M4)
• 2 x CNC Acrylic Side Cover
• 2 x CNC Brass 2.9mm Side Wing
• 1 x CNC Steel Pivot Pin
• 1 x CNC Aluminum Hopup Lever
• 1 x CNC Aluminum Soft Round Nub
• 1 x CNC Aluminum Soft Flat Nub (4mm)
• 1 x CNC Aluminum Hard Concave Nub (4mm)
• 3 x Steel Nub Spring
• 1 x CNC Steel Spring Guide
• 1 x Steel Upper Compression Spring
• 1 x Steel Center Compression Spring
• 1 x CNC Delrin Locking C-Clip
• 1 x CNC Brass Barrel Spacer
• 1 x Brass Barrel Spacer Holder O-Ring
• 1 x CNC Aluminum Rotary Dial Knob
• 1 x CNC Aluminum Inlet Adaptor (OD12mm)
• 1 x CNC Brass Inlet Spacer
• 1 x Shim Set
• 1 x O-Ring Set

Features

• Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
• Precision rotary dial design for fine hopup adjustments
• Re-engineered the hopup levers and nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
• Accepted the nozzle length from 21.00mm to 21.25mm
• Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
• Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
• Compatible with any 12mm inner bore ICS AEG Gearbox/HPA Engine nozzle outlets
• Specially designed with BB Latching System to prevent dropping BBs after removing the magazine, manually opened to release BBs from inside hopup chamber by hand

Technical Specifications:

• Model Number: MX-HOP020ME
• Overall Length: 51.65mm
  
• Overall Height: 37.75mm
  
• Application: Tokyo Marui and other compatible M4 / M16 AEG rifles
  
• Material: Aluminum 6061

Q&A

Q: What makes the Maxx Hopup Chamber M4E stand out in terms of performance?
A: The Maxx Hopup Chamber M4E is precision machined from solid aircraft-grade aluminum, offering improved accuracy, consistency, and durability. Its precision rotary dial allows for fine hop-up adjustments, and the re-engineered hop-up levers and nubs are designed to work seamlessly with R-hop, Flat-Hop, and Standard-Hop setups. This ensures straight, accurate BB flight with every shot.

Q: What compatibility does the Maxx Hopup Chamber M4E offer?
A: This hop-up chamber is designed to fit Tokyo Marui and other compatible M4/M16 AEG rifles. It accepts nozzle lengths between 21.00mm to 21.25mm and is fully compatible with most aftermarket soft and hard rubber buckings. Additionally, it works with 12mm inner bore ICS AEG gearbox/HPA engine nozzle outlets.

Q: How does the Maxx Hopup Chamber M4E prevent BBs from dropping when removing the magazine?
A: The Maxx Hopup Chamber M4E features a BB Latching System that prevents BBs from dropping when the magazine is removed. This system can also be manually opened to release BBs from inside the hop-up chamber by hand.

Q: Does the Maxx Hopup Chamber M4E offer stability and air seal improvements?
A: Yes, it is equipped with a CNC Delrin Locking C-Clip that tightly secures the barrel, preventing any wobbling or twisting. Additionally, it uses three compression springs (on top, at the bottom, and in the center) to ensure the unit is centered, straight, and air-tight, leading to better overall performance.

About the Maxx Model CNC Hopup Chamber M4E

The Maxx Model CNC Hopup Chamber M4E is a high-performance hop-up unit designed to significantly enhance the accuracy and consistency of M4 and M16 AEG rifles. Machined from a solid block of aircraft-grade 6061 aluminum, this hop-up chamber offers exceptional durability and precision. The tight tolerances ensure that the chamber fits perfectly, leading to better air seal and overall consistency in every shot. Whether you’re using R-hop, Flat-Hop, or Standard-Hop setups, the re-engineered hop-up levers and nubs are optimized to provide straight, accurate BB flight, giving you an edge in accuracy during airsoft engagements.

One of the standout features of the Maxx Hopup Chamber M4E is its precision rotary dial design, which allows for fine hop-up adjustments, letting users fine-tune their BB trajectory with ease. Additionally, the inclusion of multiple CNC aluminum and brass components, like the side covers, levers, and nubs, contributes to its smooth operation and long-term durability. The BB latching system prevents BBs from dropping out when removing the magazine, which is a thoughtful feature for players who value efficiency and reliability during gameplay.

The Maxx Hopup Chamber M4E is also designed with stability in mind. The CNC Delrin Locking C-Clip ensures that the barrel is held securely without any wobble or twist. Combined with the use of three strategically placed compression springs, this hop-up chamber remains centered and air-tight, further enhancing its performance. With compatibility for Tokyo Marui and other M4/M16 AEGs, and nozzle lengths ranging from 21.00mm to 21.25mm, it is an excellent upgrade for players seeking superior hop-up control, consistent performance, and robust durability.